Eaton EZB22AC Ezybond Earth Clamp 22mm Pipe, 2.5mm²-6mm² Cable

Eaton EZB22AC Ezybond Earth Clamp 22mm Pipe, 2.5mm²-6mm² Cable

• Continuous uniform metal contact
• No screws or loose parts
• ASTA approved electrical tests to BS951:1999
• No sharp edges and no corrosion
• Unique security locking system
• Cross-bonding becomes a simple operation with continuous uniform contact
• Patented double tooth jaw action

Advanced Earthing Technology

1. Strip at least 40mm of cable (conductor). Insert cable through both holes in the clamp. Bend over at exit to act as retention during installation using pliers.
2. Install the clamp around the pipe to be earth bonded and using finger pressure only squeeze the serrated jaws to engage at least one tooth. Check that the cable is properly positioned.
3. Using gland pliers tighten clamp firmly on the pipe engaging the security locks that ensure it’s permanent grip. Check that the clamp is firmly installed and test the connection for compliance to I.E.E. Regulations.