CP Electronics EBDSPIR-PRM-IP Compact ceiling mounted PIR Presence/Absence Detector with Lux Level Sensing, Time Delay and Infrared Override IP55

CP Electronics EBDSPIR-PRM-IP Compact ceiling mounted PIR Presence/Absence Detector with Lux Level Sensing, Time Delay and Infrared Override IP55

The EBDSPIR-PRM PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual control.

The output channel comprises a mains voltage relay capable of simple on/off switching.

Functioning as a presence detector, the unit can turn lights on when a room is occupied and off when the room is empty. Optional settings allow lights to be turned off in response to ambient daylight.

All functionality is fully programmable using an IR handset. Ceiling PIR presence/absence detector sealed to IP55 when installed flush in a ceiling.

Sensor functionality

Detection Mode

The Detection Mode can be set to behave in Presence or Absence mode:

• Presence When movement is detected the load will automatically turn on. When the area is no longer occupied the load will automatically switch off after an adjustable time period.
• Absence The load is manually switched on. When the area is no longer occupied the load will automatically switch off after the adjustable time period has elapsed.

In either case, sensitivity to movement of the PIR sensor can be adjusted using the Sensitivity parameter.

HINT: To assist in setting the Sensitivity, turn on the Walk Test LED which will flash red when movement is detected.

Switch Level On/Off

Occupancy detection can be made dependant on the ambient light level using the Lux On Level and Lux Off Level parameters.